When using swing arm clicker press, please remember the following points :
1.Make sure the power voltage is correct.The creepage switch installed .The ground wire is connected.
2.Please select the regular international standard L-HM-46# hydraulic oil.Otherwise,it will affect the life of the machine,even in high or low temperature environment,the swing arm clicker press does not work.
3.Please must make sure add enough oil into the oil tank.if not ,the arm cannot rise up when start up the machine.
4.Screws of the top cap can not be loose,damaged,tighten if loose,if damaged ,cannot disassembled, ,make repair.
5.Inspection,cleaning ,maintenance,repairing machines,you should first stop the cutting machine running,then shut off the main power.
Pre page: How to solve the problem of working pressure is insufficient
Next Page: what is cutting board